KEOR HP E UPS

Product Details:

The communication ports are in the internal door and are available in the most common protocols: relay contact, Mod Bus-RTU by RS485, Mod Bus TCP/IP SNMP Ethernet.


Internal front access: All parts are accessible from the front, to speed up installation and maintenance.


Cooling system: The optimised cooling system, placed in the upper part of the UPS, enables to position the UPS against the wall without affecting performance.

Input characteristics:

• Input voltage: 380-400-415 V 3Ph+N
• Input frequency: 50-60 Hz (45÷65Hz)
• Input voltage range: 400 V -20% / + 15%
• THD of input current: < 3%
• Input power factor: > 0.99

Output characteristics:

• Output voltage: 380, 400, 415 V 3Ph+N selected
• Efficiency: up to 96%
• Output frequency (nominal): 50 /60 Hz
• Crest factor: 3:1
• THD of output voltage: <1% (with linear load), <5% (with non-linear load)
• Output voltage tolerance: ± 1% (with balance load)
• verload capacity: 10 minutes at 125%, 30 seconds at 150%, 0,1 seconds >150%
• Efficiency in Eco mode: 98%
• Bypass: Built-in Automatic and Maintenance By-pass

Batteries:

• Battery type: VRLA - AGM Maintenance-free Lead Acid Batteries
• Battery test: Automatic or manual

Communication and management:

• LCD Display: Four LED’s to show status at a glance. Four menu-driven interface buttons, Touch Screen
• display
• Communication Ports: Voltage free relay contacts, RS485 Mod Bus-RTU, Ethernet Mod Bus over IP or SNMP protocol
• (slot SNMP optional)
• Audible Alarm: Acoustic alarms and warnings, configurable delays
• Emergency Power Off (EPO): Yes
• Remote Management: Available
• Battery temperature probe: Yes

Physical characteristics:

• Dimensions W x D x H (mm): 560 x 940 x 1800, 850 x 900 x 1975
• Net Weight (kg): 250, 300, 320, 360, 380, 720

Ambient conditions:

• Operating temperature (°C): 0-40
• Relative humidity (%): < 95% not condensing
• Protection index: IP20
• Noise at 1 m (dBA): < 60